BRITON ~ 376E Vertical Panic Bolt

The most important thing you must consider when specifying panic exit hardware is who might be in the building in the event of an emergency.

For buildings to which members of the public have access or non-public areas where personnel have not been trained in the location and operation of the buildings exit devices only products conforming to EN 1125 must be specified and installed.

Fire Safety

M a s t e r l o c k s m i t h s

Drummond Security Ltd

T e l : 0 1 7 0 7 6 4 4 4 5 4

Crime Prevention Advisors

EST. 1958

VISIT OUR SHOWROOM:

44 The Broadway, Darkes Lane, Potters Bar, Hertfordshire, EN6 2HW

Tel: 01707 644454 Fax: 01707 651314

E-mail: enquiries@drummondsecurity.com

If you are in any doubt about the buildings use or occupants ALWAYS use products that conform to EN 1125.

The vertical panic bolt is operated by a horizontal push bar, which when pushed in a downward arc withdraws the bolts, releasing the door for immediate escape in the event of an emergency.

Features:

Two point locking for extra security.

Anti-thrust device, prevents unauthorised retraction of the latch bolt.

Suitable for use on single and double door applications.

Self-handed - will suit both left and right handed doors.

Suitable for doors up to 2500mm high x 1300mm wide.

Adjustable top and bottom shoots.

Supplied with an easy clean socket.

Panic Application - EN 1125

A panic application is where the exit door is used by the public and provides “safe and effective escape through the doorway with minimum effort and without prior knowledge of operation”.

For example: Theatres, Shops, Schools, Hospitals, Cinemas.

Products used in panic applications require an operating device that covers the width of the door e.g. crossbars or touchbars.

Locksmith in potters bar